Three in One – Plastering, Smoothing and Painting

● 5 GL drum
● 300kg drum

THREE IN ONE is a colloidal surface leveling material made from acrylic resins and special additives to give it workability, stability, leveling, drying, and durability. It provides a smooth finish.

Technical Specifications
Humidity: 28.00 – 30.00
Drying time for interior product: 2 hours to the touch; 4 hours between coats.
Total drying time at 27 days.

Three-in-One Uses – Plastering, Smoothing, and Painting

AS PLASTER, REPLACER OR PLASTER ON WALLS: Add clean fine sand or fine granulometry fillers such as quartz, marble, graphite, etc., in equal parts, stir and apply. For better product adhesion, add resins or binders in a proportion of two quarts of resin per bucket of product.

AS A SMOOTHING MATERIAL FOR WALLS AND CEILINGS: Uncover the container and apply with a metal trowel and spatula or two metal trowels. For greater strength, add resins to the product, stir, and apply.

AS PAINT: Add resins or binders to the product to give a paint-like finish, apply two or three coats with the metal trowel, sand the wall with 320 dry sandpaper and you will get a perfect wall as if it were painted with a spray gun, to patch the same wall, use this same product.

OTHER USES: It can be used as a filling material by adding any type of plaster or cement. It is suitable for finishing plasterboard or drywall, for all interior uses.

Below you'll find more information about Three in One – Plastering, Smoothing, and Painting, or if you prefer, contact us for personalized advice on selecting the best materials and finishes for your needs.